What is checked at the roadworthiness test?

The roadworthiness test can only be carried out at an authorised inspection point and the parts of the vehicle to be checked are laid down in the relevant Regulation.

The roadworthiness test includes:

• Brake system inspection, which includes a check of the driving and hand brake, pedals and the technical condition of the brake system. The brakes are inspected visually, by means of road tests, by actuation and by disconnection.
• Steering equipment inspection, where the steering gear, steering wheel, steering column and steering wheel are examined and tested.
• To ensure visibility, the condition of the glass and mirrors is checked, any spots or scratches are assessed and the operation of the various nozzles is checked.
• To ensure the correct functioning of lights, reflectors and electrical equipment, the operation of the lights shall be checked by means of an appropriate device and a light test.
• To identify the vehicle, the driver is required to produce the vehicle documents, and the manufacturer's identification and registration plate are checked.
• The vehicle shall be checked on a canal or on a lift to ensure that the running order of the chassis and suspension is correct.
• Exhaust emission measurement includes the measurement of exhaust emission levels and noise. In addition, possible leaks are also checked.
• Safety equipment checks include seat belts, airbags and their compliance with the requirements laid down. All equipment must be in working order.

How do I pass a roadworthiness test?

It is important to carry out a prior check in order to pass the roadworthiness test. By checking the technical condition of your vehicle both visually and mechanically before you go in for the roadworthiness test, it is possible to detect and correct faults before the test. In addition, adequate preparation can help avoid re-inspections, which often cause extra stress and strain for drivers to carry out urgent repairs.

In addition, arriving at the roadworthiness test with a warm engine will help to ensure that the vehicle passes the test. As the roadworthiness test also includes checking exhaust levels and leaks, the extra lap before arriving at the roadworthiness test helps to burn off any excess soot and to get the most accurate emissions result possible. As the measurement of exhaust levels helps to control the environmental damage caused by vehicles, it is an extremely important part of the roadworthiness test.

Be sure to come to the roadworthiness test with both your own documents and those of your vehicle. If neither of these is present when you arrive at the roadworthiness test, you will not be able to have the test. A vehicle registration certificate together with an identity document is required to register the vehicle for the roadworthiness test.

Where can I get a roadworthiness test in Tallinn?

In Tallinn, we carry out a roadworthiness test at Tehnoülevaatus point at Ehitajate tee 116. We also offer roadworthiness tests in Peetri, at Helgi tee 4. Book your roadworthiness test conveniently and quickly on the website!